Installing The Module Retaining Bracket - Zenith z-server lt User Manual

4-15

Installing the Module Retaining Bracket

Upgrades and Options
1. To install the CPU module retaining bracket, insert the flat
end of the CPU module retaining bracket into the slot near
the fan and card guide support panel (1) until it stops.
To install the memory module retaining bracket, insert the
flat end of the memory module retaining bracket in the back
of the chassis (2) until it stops.
2. While supporting the bracket and CPU or memory module,
gently move the module up and down until it aligns with the
slots in the retaining bracket (A) in the previous illustration.
3. While squeezing the notched end of the bracket (2), slide this
end of the bracket into the slot on the back (1) or front (3) of
the chassis.