Table of Contents
Advertisement
D-28
(D-14: HERM0031)
Devices
The following illustration shows the default settings for the DAT
device (view looking from the rear of the drive) and the following
table illustrates the switch settings for selecting the SCSI
addresses. Callouts reference the following:
A.
S8 Self-test: Default = ON (enabled)
B.
S7/S6 Reserved: Default = OFF
C.
S5 Parity: Default = ON (enabled)
D.
S4 SCSI Mode: Default = ON (SCSI-2)
E.
S3,S2,S1 SCSI ID Address
A
B
C
D
E
Advertisement
Chapters
Table of Contents
