Memory Module; Installing The Memory Module - Zenith z-server lt User Manual

4-19

Memory Module

Installing the Memory Module

Upgrades and Options
Note: Any time a memory module is replaced or memory is
added, you must run the ECU to reconfigure the system. Failure
to comply will result in degraded system performance.
1. Power off the system and remove the covers as described
earlier in this chapter.
Notice: Observe static precautions. Use an antistatic wrist strap.
2. Remove the memory module from its protective wrapper,
holding the module only by the edges. Do not touch the
module components or gold connectors.
3. Record the memory module serial number in the equipment
log.