Zenith z-server lt User Manual page 55

4-7
(F4-4 OM02154B)
Upgrades and Options
4. Close the internal cover and align the six cover holes with
the corresponding chassis holes.
5. Replace the six internal cover retaining screws.
6. Position the left side cover over the chassis so that it extends
about two inches beyond the back of the chassis.
7. Slide the cover toward the front of the system so that the tabs
firmly engage in the notches in the chassis frame.
8. Replace the two side cover retaining screws, install the
padlock, if used.
Note: If your system is already set up, plug the system back in,
reconnect the peripherals, and power on the peripherals and
system.