Zenith z-server lt User Manual page 214

Equipment Log
Use this equipment log form to record pertinent information
about your system. You will need some of this information to run
Setup. Be sure to update the equipment log when you add options.
Record the model and serial numbers of the system components,
dates of component removal or replacement, and the name of the
vendor from whom the component was purchased. Be sure to
record the same information for any components added to the
system, such as hard disk drives, add-in boards, or printers.
Record the model and serial numbers of the unit and system
baseboard. The model and serial numbers of the system unit are
recorded on a label attached to the rear of the unit. The serial
number of the baseboard is located along the left side of the
board, near the expansion slot covers.
The location of serial numbers on add-in boards, hard disk
drives, and external equipment, such as video displays or
printers, varies from one manufacturer to another. Literature
accompanying these products should illustrate or describe the
location of model and serial numbers.