Zenith z-server lt User Manual page 65

4-17
(F4-10 54840005)
Upgrades and Options
5. Install the CPU module in connectors J0710, J0730, and
J0770 on the system board.
Note: Some CPU modules may not use the J0710 connector.
J0730
J0710
6. Replace the module retaining bracket as described earlier in
this chapter.
7. Replace the covers and power on the system.
8. Run the ECU to configure the system as described in the
"Configuration Your System" chapter. Verify the correct
CPU and cache settings for the CPU module you installed.
J0770