Zenith z-server lt User Manual page 25

3-8
I/O Recovery Time — Set this option to the enhanced mode to
take advantage of the EISA bus and provide greater
performance. If you experience problems, try standard mode.
Posted I/O Writes — Enable this option to provide greater
performance. If you experience problems, disable this option.
Concurrent Refresh — Enable this option to provide greater
performance. If you experience problems, disable this option.
Onboard Video BIOS Mapping — Use this setting to select the
address or addresses where you want to map the start of the
onboard video BIOS. Some software expects to find certain video
attributes at the lower address range (C0000H).
Shadow C0000 to C7FFF — When enabled, the system copies
the address, which can be cached, to 32 bit RAM memory.
Shadow C8000 to CFFFF — When enabled, the system copies
the address, which can be cached, to 32 bit RAM memory
Shadow E0000 to E7FFF — When enabled, the system copies
the address, which can be cached, to 32 bit RAM memory
Scan FLASH User Area — When enabled, the user area in the
FLASH memory will be scanned during the POST, If a user
program is found, it will be executed.
Configuring Your System