11.2.7.2. Dialing Problems
Does the unit proceed to
Phase B?
Are you using One-Touch,
ABBR or Phone Book
dialing?
Are you using direct dialing?
Is the Monitor Volume
too loud or too low?
11.2.7.3. Transmission Problems
Does the ID display?
Is the copy quality OK?
Any other problems?
START
Yes
No
Yes
No
Yes
No
Yes
No
END
START
No
Yes
No
Yes
Yes
No
END
1. Set documents on the ADF correctly.
2. Check the telephone line connection.
3. The called party is busy.
4. Refer to Sect. 4.6.
Check the registered telephone number.
Check the dialed telephone number.
Adjust the monitor volume by pressing the
SET button and < or > arrows on the LCD.
1. No ID function at the remote unit.
2. The ID is not set for the remote unit.
Make a copy, and refer to Sect. 4.4.
See Sect. 4.3. (Troubleshooting with the
Information Codes).
155
UF-5500 / 4500