Storing Phone Numbers Tor Automatic Dialing - Panasonic KX-F1050 Operating Instructions Manual

Multi function plain paper fax
Table of Contents

Advertisement

Storing phone numbers for automatic dialing
The unit's memory allows you to use both one-touch dialing and speed dialing for rapid access to your most
frequently dialed numbers.
One-touch
dialing:
Assigned to direct call station keys.
KX-F1050: Direct call station no. 1-13 (Upper stations) / 14-26 (Lower stations)
KX-F1070: Direct call station no. 1-14
Speed dialing: Assigned to 2-digit numbers.
KX-F1050: Dialing station no. 00-99
KX-F1070: Dialing station no. 00-79
To store the phone numbers in memory, proceed as follows:
Press _
until the following message
is displayed.
{SECRET]
I STORE TEL NO.
2
a: Programming
for one-touch dialing
• KX-F1050
For upper stations 1-13
Press one of the direct call station keys.
For lower stations 14-26
Press I"L-OW-E_,then press one of the
direct call station keys.
• KX-F1070
Press one of the direct call station keys.
b: Programming
for speed dialing:
Press [],
then press the desired 2-digit
number (00-99 for KX-F1050) / (00-79
for KX-F1070).
Enter the phone number up to 30 digits in
length.
• To enter a hyphen in a phone number,
press [HYPHEN} (direct call station 8).
Press ISTART/SET]-
I NAME=
Enter the station name, up to 10
characters, by following the instructions
on page 15.
Press ISTART/SET].
+To program other stations, repeat steps
2to 6.
7
Press I-S'f-6--_.
Speed dial
stations
(KX-F1050)
Direct call
stations
Helpful hint:
•To confirm stored phone numbers and station
names, print a telephone number list (see
page 52).
To keep whole or part of the phone
number secret
Press ISECRET/(direct
call station 3) before and
after the number you wish to keep secret.
•The phone number will not appear on the
display and on the telephone number list.
• Pressing [SECRET] once counts as two digits.
To erase a stored number and station
name
Press _
in step 3 to clear the phone
number.
Press [DELETE] (direct call station 7) repeatedly
in step 5 until all of the characters are erased.
Then press {START/SETJ.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-f1070

Table of Contents