Panasonic UF-5500 Service Manual page 349

Network Firmware Update Tool (LAN)
When the transfers are completed, all jobs in the
11.
spooler disappear, and the communication log is
displayed.
After the firmware code is successfully
programmed to the Firmware Flash Memory in
the device, the device will shut down and reboot
automatically.
Click [Finish].
Note:
When firmware update was successfully
finished,[OK] is displayed after version check. If
[NG] is displayed, the firmware updating has
failed.
Please confirm the firmware version at
Panasonic device,and retry firmware update
again if necessary.
A Firmware Deletion confirmation screen will
12.
appear.
Click [Yes] to delete the firmware code files that
you used for the update, or click [No] to keep the
firmware code files in your PC for future use.
Confirm the message in the text box and click
13.
[OK] to close the tool.
349
UF-5500 / 4500
or