Panasonic UF-5500 Service Manual page 160

UF-5500 / 4500
Code Mode Phase
634 XMT B
638 XMT LAN
722 RCV LAN
731 RCV LAN
741 XMT A
(Polling)
800 Relay Comm.
815 Conf. RCV
816 Conf. Polled
825 Conf. RCV
Conf. Polled
870 MEM XMT
Multi-Copy
Fax Information Codes
Description of Problem
Redial count over with no response or busy
tone was not detected.
Note:
U.S.A. and Canadian models will redial
only once if a busy tone is not detected.
Power turned off with applicable data in
memory or during communication.
Failed to obtain the Network Parameters
(such as: IP Address, Subnet Mask, Default
Gateway IP Address, etc.) from the DHCP
server.
Dialer full while Relayed Transmission
Request was received.
Dialing was not successful due to missing
of the telephone number. Occurs when
deleting the telephone number of reserved
One-Touch/Abbreviated dialing numbers
with program keys.
The machine was requested to relay a doc-
ument but has no Relay Hub capability.
Mailbox is full.
"The received Polling Password did not
match. The machine does not have Confi-
dential Comm. capability."
Parameter settings of the initial sending
station are not properly set.
Memory overflow occurred while storing
documents into memory.
160
Cause
Telephone line cable is disconnected.
Wrong number is dialed.
MAIN PCB is abnormal.
Power cord unplugged. Power failure occurred.
LAN Cable is disconnected.
DHCP is not available.
(Contact the Network Administrator.)
Dial buffer for manual number dialing (70 sta-
tions) are being used.