Panasonic UF-5500 Service Manual page 82

UF-5500 / 4500
• The document limitation to send multiple pages is as follows.
- Document Size : A4 or Letter size
- Document Thickness : 0.0024" to 0.0039"
*Please note that although the size meets the specifications, you might not be able to set 30 pages with some types of paper.
• Transmitting documents longer than 356 mm (14") requires user's assistance.
8.1.4.2. Using the auto document feeder
Note:
• Confirm that there are no documents on the scanner glass.
• Confirm that any ink, paste or correction fluid has dried completely.
• Remove clips, staples or other fasteners.
• Do not insert the following types of documents (Make a copy of the document using the scanner glass and set the copy instead.):
- Chemically treated paper such as carbon or carbonless duplicating paper
- Electrostatically charged paper
- Badly curled, creased or torn paper
- Paper with a coated surface
- Paper with printing on the opposite side that can be seen through the other side, such as newsprint
• The total height of the documents when laid flat, must be less than 4 mm (
automatic document feeder, they may fall or cause a jam in the feeder.
• To set a document with a width of less than 210 mm (8
ment onto A4 or letter-size paper, then setting the copied document for better results.
• Do not set documents that do not satisfy the requirements of size and weight. Make a copy of the document using the scanner
glass and set the copy.
• Available document size, document weight and effective scanning area are as follows:
Document Size
Maximum Size
216 mm (8.5")
600 mm (23.6")
Direction
• Shaded area will be scanned.
• When using the unit as a scanner, the effective scanning length depends on the selected paper size.
1
/ "), we recommend using the scanner glass to copy the original docu-
4
Minimum Size
148 mm (5.8")
128 mm (5.0")
Direction
82
5
/ "). If the documents exceed the capacity of the
32
Document Thickness
Single sheet:
0.06 - 0.15 mm
(0.0024" - 0.0060")
Multiple sheets:
0.06 - 0.10 mm
(0.0024" - 0.0039")