Panasonic DBS 40 Operating Manual page 166

Chapter 4. Key Telephone Features
Technical Manuals Online! - http://www.tech-man.com
Tone Calling.
With tone calls, a ringing tone is sent to the called extension.
System programming determines whether the DBS uses voice or tone calling
as a default. If voice calling is the default, dialing "1" after the extension
number changes the call to a tone call. If tone calling is the default, dialing
"1" results in a voice call.
To make a Voice Call:
!. Pick up the handset.
The phone issues intercom dial tone.
Note:
If you are calling from an extension programmed for Prime Line
Preference, press the FF key programmed for intercom operation.
2. Dial the extension number (10-69) or ( 100-699).
3. If the system default is tone calling, dial "I .'*
-'Talk-EXT XXX" (where "XXX" is the extension) appears on the
l
display. If the extension name has been stored, that name appears on
the display after "Talk" instead of "-EXT XX."
The EXT LED lights.
l
4. Complete the call and repiace the handset.
The EXT LED goes off.
To transfer a call using Voice Calling:
The EXT LED flashes.
l
"Hold-EXT XXX" (where "XXX" is the extension) appears on the
l
display.
2. Dial the number of the extension to which the call will be transferred.
3. If the system default is tone calling, dial "1."
"Talk-EXT XXX" (where "XXX" is the extension) appears on the
display.
Section 700 - Operation
.