Panasonic DBS 40 Operating Manual page 162

Chapter 4. Key Telephone Features
Feature
Voice Mail Transfer Key
6.0 or higher)
One-Touch VM Access
(CPC-AH and CPC-B Version
5.0 or higher)
Technical Manuals Online! - http://www.tech-man.com
Code
to be entered
CONF, AUTO AUTO, NNN XXX or AUTO Speed Dial
Note: If a password is used, it can be from 1 to 3 digits. If
the password is over 3 digits, it must be assigned to a per-
sonal or system speed dial number. Include an ending # sign
in the speed dial number if you are accessing a DBS voice
mail system.
I
Note: If a password is used, it can be from 1 to 3 digits. If
the password is over 3 digits, it must be assigned to a per-
sonal or system speed dial number. Include an ending # sign
in the speed dial number if you are accessing a DBS voice
mail system.
code is programmed into a key, the previously programmed code
l
is erased.
To erase a code programmed into a key, press the HOLD key when the
l
display reads "Enter Code. " "Code Cleared" then appears on the display.
The system can be programmed so that Pooled Trunk Access calls
l
automatically use LCR when 9 is selected.
Night Service, DND. and BGM can be activated through FF keys without
l
lifting the handset.
When you are making a call using the Speed Dialing feature, the FLASH
l
key stored in Speed Dialing becomes the PBX flash feature.
When an extension is assigned to an FF key, the FF key changes colors to
l
indicate the status of the extension as follows:
72 and EM/24 keys stay solid red instead of flashing red)
set.
Voice mail
pilot number Password (optional)
AUTO NNN XXX or AUTO Speed Dial#
V ice ma'1
pi ot num er
Section 700 - Operation
Password (optional)