Panasonic DBS 40 Operating Manual page 94

Section 700 - Operation
Technical Manuals Online! - http://www.tech-man.com
6. Press AUTO to backspace
7. Use the dialpad sequences shown iri Table 3-l on page 3-10 to enter
letters and/or numbers.
Press FLASH after each letter or number.
Press CONF to switch between numbers and letters.
8. To store your entry, press HOLD.
Note: The name does not change on the extension until the extension goes off
hook.
To assign text to Call Waiting/OHVA Text Replies (CPC-Ail and CPC-
B Version 4.0 or higher):
1. Pick up the handset or press ON/OFF.
2. Press PROG.
3. Dial #5
4. Dial l-5, depending on which text message you want to change.
6. Use the dialpad sequences shown in Table 3-l on page 3-10 to enter
letters and/or numbers.
Press FLASH after each letter.
Press CONF to switch between numbers and letters.
7. To store your entry, press HOLD.
Chapter 3. Attendant Features
erase the existing name.
and