Remote Programming Using Pcas Or Dbs Manager - Panasonic DBS 40 Operating Manual

Chapter 2. System Features

Remote Programming Using PCAS or DBS Manager

(CPC-A 3.1 and higher, CPC-A II, and CPC-B 1 .O and higher)
Description
Page 2-44
Technical Manuals Online! - http://www.tech-man.com
Terminal Programming Commands
Use the following commands to navigate terminal programming:
Command
- B
- F
- t
- R
PCAS provides a menu-driven interface for remote maintenance. For
complete details about using PCAS, see the PCAS User-S Guide.
Very similar to PCAS but more enhanced is the Windows-based program
DBS Manager. For complete details of using DBS Manager, see the DBS
The primary function of these programs is to allow you to set up and maintain
DBS settings using a PC. Their communications capabilities allow you to
maintain the DBS settings while you are on-site with the DBS, or while you
are off-site at a remote location.
These programs enable you to perform tasks such as:
Setting up communications information
l
DBS ManGiGlZGdWVK
Description
Access System parameters
Access Trunk parameters
Access Extension parameters
Access Ring assignments
Access FF-key assignments
Access Name assignments
Access Toll Restriction data
Access Least Cost Routing data
Access Copy mode
Access Speed Dial data
Back to previous address
Back to previous port
Forward to next address
Forward to next port
Return provide mode
IO
Quit
Section 700 - Operation