Panasonic DBS 40 Operating Manual page 53

Chapter 2. System Features
Related Programming
Hardware Requirements
Considerations
Technical Manuals Online! - http://www.tech-man.com
ON/OFF
The LED lights.
l
2.
Dial "#521." (Note: #520 can be used to toggle between modes.)
3. ON/OFF
Press the
ON/OFF
The LED goes off.
l
"DAY MODE" appears on the display.
l
l
FF4 (Ringing and Hunt Groups): CO Day Ring Assignments
l
FF4 (Ringing and Hunt Groups): CO Night Ring Assignments
l
FF4 (Ringing and Hunt Groups): CO Night2 Ring Assignments
l
Calls during a Night Mode are often indicated by external paging speakers
or an external ringing device, such as a night bell. External paging and
ringing devices are not provided with the DBS; they must be purchased
separately.
.
Day, Night and Night 2 modes can be assigned to FF keys on an attendant
phone. The attendant can switch between Day, Night and Night 2 modes
simply by pressing the appropriate key. The FF key lights red when the
system is in the assigned mode. Alternatively a DAY/NIGHTl/NIGHT2
toggle mode key can be assigned. Pressing the key toggles between modes.
When in Day mode, the FF key LED is not lit. When in NIGHT1 mode, the
LED lights red. When in NIGHT2 mode, the LED lights green.
If the same mode key is assigned on different attendant positions, each key
indicates the current mode. For instance, if a
two attendants, both light when in
If the system is programmed to switch between night and day modes
can manually switch
automatically, you
software.)
key.
NIGHT1
between modes by using the
Section 700 - Operation
NIGHT1
key is assigned for
mode.