Call Waiting - Panasonic DBS 40 Operating Manual

Section 700 - Operation

Call Waiting

(All Versions)
Description
Table 6-4. Call Waiting Text Messages
Operation
DBS-70-700
Technical Manuals Online! - http://www.tech-man.com
When you transfer a call to an extension that is busy or does not answer
l
and does not have Call Forwarding activated, a recall tone sounds at your
extension after Transfer Recall Timer expires.
You can send a Call Waiting
busy extension. The party receiving the message need only replace
handset and then pick it up again to be automatically connected to your
extension.
The following messages can be sent using the Call Waiting feature:
I 5
6
Message codes O-4 are not available.
To Set Cdl Waiting:
1. Lift the handset.
2. Dial the extension number.
3. Upon hearing busy tone, press "3."
4. If you wish to send a text message, dial the desired message code (5-7 or
9).
The message displays on the called party's phone if the called party has a
key phone. (If the called party does not have a display, the extension
continues to issue
DBS Manual - Issued 8/l/95
signal, followed by a brief LCD message, to a
Message
"Need Help"
"Important*'
call waiting tone.)
a
Chapter 6. SLT Features
the
I
I
6-17