Panasonic DBS 40 Operating Manual page 252

Chapter 6. SLT Features
Related Programming
Considerations
Table 6-2. Example Return Times for Absence Messages
Technical Manuals Online! - http://www.tech-man.com
To Cancel an Absence Message
2. Dial "7 1."
3. Replace the handset.
FFI (System): Extension Class of Service Setting (CPC-AII and CPC-B
l
Version 3.1 or higher)
FF3 (Extension): Extension Class of Service Assignment (CPC-AI1 and
l
CPC-B Version 3.1 or higher)
FF6 (Names and Messages): Absence Messages
l
Extensions without displays get a busy signal, rather than the Absence
l
Message.
code
l
"Absence," followed by the code number, appears on the caller's
selected,
display.
Absence Message return times can be entered as shown in Table 6-2:
l
Four-digit numbers can also be entered (0000-9999 = Hours & Minutes or
Month & Date).
In CPC-A and CPC-B Versions prior to 5.0, DND and Absence Messages
l
cancel Call Forwarding.
Beginning with CPC-B Version 5.0, calls to extensions with DND or
Absence Message turned on are treated differently, depending on whether
they are trunk or intercom calls. Intercom calls receive busy tone; trunk
number that has not been assigned a text message is
Return lo:35
1035
Section 700