Panasonic DBS 40 Operating Manual page 182

Chapter 4. Key Telephone Features
Related Programming
4-72
Technical Manuals Online! - http://www.tech-man.com
The Talk Back key flashes red.
l
4. Make your announcement.
To answer an OHVA:
1. Press the Talk Back key ("3 must be programmed in an FF key).
The Talk Back key flashes red.
2. To return to the previous call, press the Talk Back key again.
To transfer a call using OHVA
1. Press the HOLD key to place the call to be transferred on hold.
2. Dial the number of the extension to which the call will be transferred.
3. Press "5" and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press the
FLASH key to cancel the transfer.
If the transferred call is accepted, and Onhook Transfer is enabled for
your extension, hang up. If OnHook Transfer is not enabled, press PROG
and then hang up.
Note: Attendant console phones transfer by pressing the RELEASE key.
To answer a call after It has been announced using OHVA:
1. Replace the handset.
Your extension rings.
2. Pick up the handset.
FFI (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
l
3.1 or higher)
FF3 (Extension): Extension Class of Service Assignment (CPC-AI1 and
l
CPC-B 3.1 or higher)
FF3 (Extension): Call Waiting/OHVA
l
DBS Manual - Issued 8/l/95
Section 700 - Operation
DBS-70-700 .