Panasonic DBS 40 Operating Manual page 167

Section 700 - Operation
Technical Manuals Online! - http://www.tech-man.com
4. Replace the handset.
To make an Tone Call:
1. Rick up the handset.
The phone issues intercom dial tone.
Note:
preference, press the FF key programmed for intercom operation.
2. Dial the extension number.
3. If the system default is voice calling, dial "1."
"Call-EXT XXX" (where "XXX" is the extension) appears on the
l
display. If the extension name has been stored, that name appears,
rather than the extension number.
The called extension rings and the EXT LED flashes.
l
When the call is answered, Talk-EXT XXX" (where "XXX' is the
l
extension) appears on the display. If the extension name has been
stored, that name appears on the display after "Talk" instead of "-EXT
. x x x . "
4. Complete the call and replace the handset.
The EXT LED goes off.
To transfer a call using Tone Calling:
1. Rress.the HOLD
The EXT LED flashes.
l
"Hold-EXT XXX" (where "XXX" is the extension) appears on the
l
display.
2. Dial the number of the extension to which the call will be transferred.
3. If the system default is voice calling, dial "1."
"Call-EXT XXX" (where "XXX" is the extension) appears on the
display.
4. Replace the handset.
Chapter 4. Key Telephone Features
key.
4-57