Panasonic DBS 40 Operating Manual page 174

Chapter 4. Key Telephone Features
Multi-him (ML)
Description
Operation
Operation
To originate a trunk call
To place a call on Exclusive Hold (page 4-36)
To place a call on System Hold (page 4-17)
To transfer a call
Related Programming
Considerations
Technical Manuals Online! - http://www.tech-man.com
Appearances
You can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) key. Each extension can have up to 24Multi-Line keys. The
Attendant can have up to 24 Multi-Line keys.
See "ML/MC0 Separation" (page 4-65) for information on assigning both
ML and MC0 keys to the same system (CPC-AI1 and CPC-B Version 4 or
higher).
l
FF2 (Trunks): Pooled Trunk Access for Group "9"
l
FF2 (Trunks): Pooled Trunk Access for Group "8 l-86"
l
FF3 (Extension): Forced Least Cost Routing
l
l
l
A Multi-Line will ring for incoming CO calls, Intercom Calls, recall
key
l
calls, and call-forward calls.
Section 700 - Operation
Action
Press an idle ML key.
The blinks (green) as the call is
key
made.
Press the ML key.
Press the HOLD key.
Press HOLD, dial the destination exten-
sion, then press PROG.