Traffic Measurement - Panasonic DBS 40 Operating Manual

Chapter 3. Attendant Features

Traffic Measurement

(All Versions)
Description
Table 3-3. Traffl measurement options
Operation
Check the number of outgoing calls made on an outside
line
Check the number of times a System Speed Dial number
was used:
Notes:
NN = CO line number (01-64); SS = System Speed Dial number (00-89 or 000-199)
Technical Manuals Online! - http://www.tech-man.com
An attendant phone can track the number of outgoing and incoming calls for
each outside line number, as well as the number of times each System Speed
Dial number is used. This information can be used to evaluate trunk usage
and control costs.
To view traffic measurments:
ON/OFF
1. Press the
The phone issues intercom dial tone.
l
ON/OFF
The
l
2. CONF
Press the
3. Dial the traffic measurment code from the table below.
For example, to check the number of outgoing calls made on an outside
line 01, enter "#90," then "01". If 1234 outgoing calls have been made,
"Outgoing01 1234" appears on the display.
Pressing the #key steps through the trunk and system speed dial numbers.
4. ON/OFF
Press the
ON/OFF
The LED goes off.
key.
LED lights.
key.
key.
I *2ss I
I @33
Section 700 - Operation
Display
"SYS-SPD SS"
I