Panasonic DBS 40 Operating Manual page 185

Section 700 - Operation
DBS-70-700
Technical Manuals Online! - http://www.tech-man.com
7. Presy the AUTO key.
8. Enter the Speed Dial number for the telephone number.
The ON/OFF LED goes off.
To assign a DBS Feature Code to a One-Touch key:
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
2. Press the PROG key.
3. Press the One-Touch key to be programmed.
4. Enter the feature code.
5. Press the HOLD key.
6. Press the ON/OFF key.
The ON/OFF LED goes off.
To assign an Outside Telephone Number to a One-Touch key:
1. Press' the ON/OFF key.
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
2. Press the PROG key.
3. Press the One-Touch key to be programmed.
4. Press CONF followed by the Pooled Trunk Access code (9,81-86).
5. If a pause is required, press the REDIAL key.
This inserts a pause between the access code and the telephone number.
Chapter 4. Key Telephone Features
to be chained.
4-75