When A Job Is Not Performed - Ricoh 8025e Troubleshooting Manual

When the Machine Does Not Operate As Wanted

When a Job Is Not Performed

If you are not able to carry out your job, it may be that the machine is being used
by another function.
1
Wait until the current job is completed before trying again. In certain cases, you
can carry out another job using a different function while the current job is being
performed. Performing multiple functions simultaneously like this is called
"Multi-accessing".
Combination Chart
❖ Function Compatibility
The chart shows Function Compatibility when print priority is set to "Inter-
leave". See "Print Priority", General Settings Guide.
: Simultaneous operations are possible.
: Operation is enabled when the relevant function key is pressed and remote
switching (of the scanner) is done.
: Operation is enabled when the {Interrupt} key is pressed to interrupt the
preceding operation.
→: Operation is performed automatically once the preceding operation ends.
×: The operation must be started once the preceding operation ends. (Simul-
taneous operations are not possible.)
Mode after you select Copy
Mode before you select
Copy Operations
for Copying
Stapling
Sort
10
Facsimile
× × ×
→ →
*1 *1 *1 *5 *2
→ →
*1 *1 *1 *2
Printer
→
*2 *2
*2 *2
→
*2 *4 *4
→
*2