Setting The Panel Calibration; Exporting Logs; Setting Job Skip; Changing The Keyboard Layout - Toshiba E-STUDIO477S Advanced Manual

SETTING ITEMS (ADMIN)

Setting the panel calibration

You can adjust the position of each button when properly
1 pressing the buttons on the touch panel becomes difficult.
On the panel calibration screen, touch the center of the + mark
with a stylus by following the message displayed on the touch
panel.
2
3
When the panel calibration operation is completed, you will be
returned to the GENERAL menu (2/2).
Note
• While the panel calibration operation is being performed, no
other operations can be performed on the touch panel. If
you open the front cover of the equipment during the panel
4
calibration operation and instructions to replace toner
cartridge are displayed, close the front cover to complete
the panel calibration operation before proceeding to replace
the toner cartridge.

Exporting logs

5
You can export logs of each operation displayed in the LOG list
(PRINT/SEND/RECEIVE/SCAN) on the JOB STATUS screen
to a USB storage device.
1
Connect your USB storage device to the
USB port on the equipment.
2
Begin exporting the log data.
1) Select the log file format from CSV or XML.
6
2) Select the log type to export.
3) Press [SAVE] to begin exporting.
7
Memo
• You can select only one log type per operation.
Note
• Do not remove the USB storage device until the data
transfer is complete. Removing the device while data
are being transferred could destroy them or cause a
malfunction of the equipment.
3
When exporting is complete, press [OK].
4
Remove the USB storage device from the
USB port on the equipment.

Setting job skip

You can set to skip a copy or print job that failed due some
reason and proceed to others.
Item name
JOB SKIP CONTROL
Memo
For instructions on how to resolve the cause of a skipped copy
or print job, refer to the Printing Guide.

Changing the keyboard layout

You can change the layout of the on-screen keyboard to a
different one.
On the KEYBOARD LAYOUT screen, select the desired
keyboard layout, and press [OK].
You will be returned to the GENERAL menu (2/2).
- 174 -
Description
• ON — Press this button to
enable the function.
• OFF — Press this button to
disable the function.