8.
Proceed to Section 4.0 of this document.
9.2.7. Calibration Update Procedure
Before proceeding to Step 1 of the calibration update procedure, there are three update scenarios to
consider.
A.
Tx calibration only – Rename the text file to "falcon_delta00129.007.dep" and place it into the zip
file located in the PhoneTool directory named "falcon_eep_cfg_dep.zip." Overwrite the existing
file if one already exists, e.g.:
falcon_delta00129
.007.dep
B.
Rx calibration only – Rename the text file to "falcon_delta00129.007.dep" and place it into the zip
file located in the PhoneTool directory named "falcon_eep_cfg_dep.zip." Overwrite the existing
file if one already exists, e.g.:
falcon_delta00129
.007.dep
C. Both Tx and Rx calibration – Merge the text files created during the transmitter and receiver
calibration procedures into one text file and rename it to "falcon_delta00129.007.dep" and place
it into the zip file located in the PhoneTool directory named "falcon_eep_cfg_dep.zip." Overwrite
the existing file if one already exists, e.g.:
falcon_delta00129
.007.dep
PROVISIONAL ISSUE
− 9-20 −