Table of Contents
Advertisement
3.
Reassemble the lower case assembly. Push the antenna in until it locks in position. Place the SD cover into the SD opening
and rotate until snapped into place. If necessary replace the I/O cover.
4.
Place the headset jack cover in the lower case cover. Assembly the lower case with the lower cover assembly. Close the
four snaps making sure that both assemblies are connected.
5.
Insert four screws and torque all screws to 1.3 KGF-CM using a #3ULR0 Trident screwdriver tip. Replace the two screw caps.
6.
Replace battery and battery cover.
PROVISIONAL ISSUE
− 5-18 −
Advertisement
Table of Contents
