Table of Contents
Advertisement
4.
Remove main LCD module.
5.2.11 RF Antenna, Bluetooth Antenna and SD Cover Removal
1.
It is only necessary to remove the antenna if the antenna or antenna contact is damaged.
2.
Using a small screwdriver blade or blunt instrument, apply pressure to the antenna snap in the direction shown (1) while
pulling the antenna away from the case (2). Remove Bluetooth antenna and antenna terminal with tweezers. Remove SD
cover. Retain for reassembly.
3.
To replace, push the antenna into its receptacle until it locks in position.
PROVISIONAL ISSUE
− 5-10 −
Advertisement
Table of Contents
