5.
Rotate lower flex lock (2) and remove flex from bottom connector. Remove lower flex from sub PCB.
Caution: Lift up (open) or push down (close) flex lock carefully. If damaged, a new connector must be placed on PCB.
5.2.3
Vibrator Removal
1.
Gently lift and remove vibrator unit.
5.2.4
Keypad Removal
1.
Lift up and remove keypad.
Note: If the keypad is to be reused, carefully lift it from the PCB. If the adhesive is damaged, new keypad will be
required for reassembly.
PROVISIONAL ISSUE
− 5-5 −