3. Place the main LCD bezel into the opening of the upper cover.
4. Attach the PCB connector into the receiver (1) and (2).
Attach the camera connector to the connector on the PCB (3).
Caution: Damage to the flex circuit portion of the upper flex PCB is NOT repairable. The flex circuit may be easily
stretched or cut during this operation, causing a small tear which can grow with use and render the circuit
unusable. Handle this assembly with care to avoid damage.
5.3.4. Upper case reassembly
1. Correctly align the upper case assembly over the upper cover assembly. Press down until the four snaps engage.
Insert the sub LCD cushion and the camera cushion.
PROVISIONAL ISSUE
– 5-12 –