Table of Contents
Advertisement
1.
Input the Rx ARFCN (EGSM = 37 ch, DCS = 699 ch, PCS = 661ch) and press the Enter key.
NOTE: If the PCS band is being calibrated, the "1900 Band" box must first be checked.
2.
Use the pull-down menu to select the Gain "Rx(1) = 69 dB."
3.
Check the "Burst Rx" of the RF Mode.
4.
Click the "Get" button of Rx IQRMS. The value displayed at "Slot1" will be the "IQRMS value".
5.
Enter the IQRMS value into the RX Excel sheet (below). The IQRMS value will be used to
calculate the gain and channel compensation values. It will then be stored to the eep file of the
RX Excel sheet.
6.
Repeat Steps 1 through 5 for all calibration channels.
7.
When all channels and bands are calibrated, save the Excel sheet of eep data using File -> Save
As -> Text (Tab delimited) -> Save.
PROVISIONAL ISSUE
− 9-19 −
Advertisement
Table of Contents
