Table of Contents
Advertisement
5.3.6
Sub LCD Panel Reassembly
1.
Remove the panel from the liner sheet, and inspect for foreign objects or fingerprints on the interior surface. If necessary,
clean the sub LCD glass surface and the interior of the sub LCD panel with an ionized air spray. Align the panel to the
correct orientation, and locate in the upper case. Press and hold the adhesive areas (around the perimeter) with moderate
(not excessive) force to the upper case for ten seconds
5.3.7
Upper Cover Screw Covers Replacement
1.
Locate the screw covers in the two recesses at the top of the upper cover.
5.3.8
Upper Housing Reassembly to the Lower Cover
1.
Insert the hinge in the upper cover as shown.
PROVISIONAL ISSUE
− 5-14 −
Advertisement
Table of Contents
