Panasonic X66 Operating Instructions Manual

Panasonic digital cellular phone operating instructions
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic X66

  • Page 2: Table Of Contents

    Contents Important Information... 1 Safety Considerations ... 1 Care and Maintenance... 3 Getting Started ... 4 Inserting and Removing the SIM... 4 Attaching and Removing the Battery ... 4 Charging the Battery ... 5 Operation of Battery Level Indicator ... 5 Low Battery Power Warning ...
  • Page 3 Contacts...72 Browsing Contacts ...72 Storing...74 Call log ...76 Speed Dial ...78 Grouping Contacts Entries ...79 My Number ...80 Group Settings ...82 Memory status ...83 Copy from SIM ...83 Browser...84 Server Setting ... 84 Viewing the Contents ...85 Browser Options ...86 Browser Options (Bookmarks) ...87 Browser Options (Enter address)...87 Browser Options (Save image) ...88...
  • Page 4: Important Information

    Important Information Thank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on GSM networks – GSM900 and GSM1800. It also supports GPRS for packet data connections. Please ensure the battery is fully charged before use.
  • Page 5 The use of an unapproved modification or attachment may result in the invalidation of your guarantee – this does not affect your statutory rights. This phone should only be used with Panasonic approved accessories to ensure optimum performance and avoid damage to your phone.
  • Page 6: Care And Maintenance

    Care and Maintenance Pressing any of the keys may produce a loud tone. Avoid holding the phone close to the ear while pressing the keys. Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault.
  • Page 7: Getting Started

    Getting Started Some services described in this manual are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your service provider. Inserting and Removing the SIM The SIM is inserted into the back of the phone underneath the battery. Insert the SIM Slide your SIM card (with the gold contacts...
  • Page 8: Charging The Battery

    Charging the Battery Connecting and disconnecting the Fast Travel Charger The battery must be attached in the phone before the charger is connected. Press the button on the top of the connector and insert it into the base of the phone. NOTE: Do not force the connector as this may damage the phone and/or the charger.
  • Page 9: Keys & Displays

    Keys & Displays Left Soft Key Send Key To answer a call or to make an Outgoing Call 1Key/Voicemail Key Press and hold to call Voicemail Asterisk Key Charging Indicator Lights red during charging Charging Connector Earpiece Camera Lens Main Display Self-Portrait Mirror Watch yourself...
  • Page 10: Keys

    Keys Navigation Key: Select and save settings, and scroll/move through menus, text and Contacts. Also serves as shutter button for the camera and to control movements while playing games. < Left Soft Key: Perform function displayed in lower left corner of the display. From Idle, press to open Messages Menu.
  • Page 11 1 Key/Voicemail Key: Press and hold $ to retrieve voicemail messages. 1-9 Number Keys: Enter numbers. Press and hold a single key (2~9) for Speed dial. In text entry mode, enter text, numbers and characters. 0 Number Key: Enter number. In text entry mode, enter number and characters. International Dialling Prefix Key: Press and hold # to enter + (the international dialling prefix) while entering a phone number.
  • Page 12: Shortcuts

    Shortcuts When you are familiar with the menu system, you can use the keypad to access features instead of navigating through the display menus. Short press (from Idle) Function Messages Browser < Menu Shortcuts Contacts Long press (from Idle) Function Voicemail Speed dial Quiet Mode Setting...
  • Page 13 Different icons are shown, depending on the features you are using and the options you have selected. Icons appear on the main display as shown in the following table. Icon Indicates Signal strength The more bars visible, the stronger the signal. Battery charge level Battery is charging GPRS is active...
  • Page 14: Illumination Light

    Illumination Light Function Luminous colour Incoming Call Call in progress Missed call notification Message notification (SMS or MMS or WAP Push) Alarm notification NOTE: Flash interval of these illumination depend on network condition. Purple Switchover to voice call (Blue), or if call is missed (Yellow) Blue Call ended Mobile phone status: Closed...
  • Page 15: How To Use This Phone

    How to Use this Phone Symbols Used in the Manual The table below shows the symbols used throughout these instructions and the corresponding meaning in the column on the right. Symbol < Press centre of the Navigation key to select option or to save. 1537 Direction in which you can move on the display screen with the Navigation key.
  • Page 16: Selecting A Menu Option

    Selecting a Menu Option From Idle, press the centre of the Navigation key the main menu display. The main menu display has 9 options. Press to perform function displayed in the lower left corner. < to open Main menu Press to CANCEL/ EXIT or to perform function displayed in lower right corner.
  • Page 17: Phone Basics And Managing Calls

    Phone Basics and Managing Calls Switching Phone ON/OFF ... 1 Press and hold 2 When the phone is switched on, a greeting may be displayed and the phone then enters the Idle mode. Press and hold NOTE: When switching the phone off, use only phone.
  • Page 18: Making Calls

    Making Calls • To make a call, start in Idle mode. • Ensure network name and appear on the display. Standard Dialling ... "! 1 Enter phone number ( Contacts Dialling ... Contacts (see “Shortcuts” on page 9) required contact Recent Number Dialling (Calls Made or Received)...
  • Page 19: International Dialling

    International Dialling ... The international code for the destination country/region should be entered, followed by the area code and phone number. 1 Press and hold 2 Enter country/region code 3 Enter area code and phone number Emergency Call... To make an emergency call the antenna ( If SIM is installed enter emergency number If SIM is not installed, <...
  • Page 20: Answering Calls

    Answering Calls... < Press any key except Ending / Rejecting Calls or fold the phone during an incoming call to reject the call or end a call in progress.
  • Page 21: Managing Calls

    Managing Calls ... Voicemail You need to subscribe to the voicemail service through your service provider before you can retrieve voicemail messages. To check if voicemail access has been configured, press and hold See “Voicemail” on page 67 on how to programme. 1 When a new voicemail message is received, an alert sounds and display or you receive an SMS notification (depending on the local service) •...
  • Page 22: In-Call Options

    In-Call Options During a call, for options < Option When Hold Call Put a call on hold. To resume, From contacts Access the contact list Create SMS Access Create SMS Inbox (SMS) Access Inbox (SMS) Calendar Access Calendar Handsfree / Handheld Switch to Desktop Handsfree or Handheld Earpiece Volume ...
  • Page 23: Dtmf Tones

    DTMF Tones ... DTMF tones can be sent during conversation. These are often used to access voicemail, paging and computerised home banking. For example, you may need to input a number to remotely access voicemail messages. A phone number may be stored in Contacts with DTMF tones, allowing the number to be dialled upon recall and the DTMF number to be sent automatically.
  • Page 24: Making A Second Call

    Incoming Call While on a Call ... During a call, you may receive another call. To enable this, call waiting must be on (see “Call Waiting” on page 39). Accept a second call: (The second call is active, the current call is put on hold) The following options are available when two calls are connected.
  • Page 25: Multi-Party Calls

    Multi-Party Calls ... 1 Establish a multi-party call by merging two calls 2 Continue to add people to the multi-party call (up to 5 connections in total) by calling others or by accepting incoming calls When making a call or accepting an incoming call, the multi-party call is placed on hold. The callers already in the multi-party call can continue to talk with each other while on hold.
  • Page 26: Call Log

    Call log Recently dialled phone numbers, answered calls and missed calls are stored in the Call log. It is possible to call and send messages from stored numbers. Viewing Call log ... Dialled numbers, Answered calls or Missed calls < required phone number Sending Messages ...
  • Page 27 Saving a Phone Number from Call log into the Contacts list... 8 Enter as appropriate (If required, repeat steps 7 and 8) Options in Call log ... In each Call log list, the following options are available. For options Option Call Send message Add to contacts...
  • Page 28: Explore The Menus

    Settings Contacts list Add contact Call log Speed Dial list View groups Advanced (Service numbers) (SIM Tool Kit) Alarm Sound recorder Calculator Infrared Panasonic box Profiles Sound Vibration Alert Display Language Data connections GSM network Calls Security Time and date...
  • Page 29: Settings Menu Structure

    Settings menu structure Profiles Sound Vibration Alert Display Settings Language Data connections GSM network Calls Security Time and date NOTE: Service Charge is SIM ( Incoming Tone Message Tone Ring Volume Key Tone Key Volume Warning Tone Display language Input language New Search Select Network Search Mode...
  • Page 30: Settings

    Settings Profile Setting Settings You can switch between five profiles in your phone each with a distinct combination of ring tone, ring volume, etc. Profiles are set up for use in different environments – for instance you might want to create a Quiet profile, a Meeting profile with a ring tone appropriate for formal occasions and an Outdoor profile for loud environments.
  • Page 31: Editing Profile

    Editing Profile Settings Incoming Tone ... From Profiles menu Profiles Message Tone ... From Profiles menu Ring Volume... From Profiles menu NOTE: Step Tone will give an escalating tone. required profile < Edit < Incoming Tone < Preinstalled, My Media or Download <...
  • Page 32 Settings Key Tone ... From Profiles menu required profile Edit Key Tone required tone type Profiles Key Volume ... From Profiles menu required profile Edit Key Volume Warning Tone... From Profiles menu required profile Edit Warning Tone On or Off Vibration Alert ...
  • Page 33: Tone Setting

    Tone Setting Settings You can set ring tone, ring volume, etc. The ring tone of the phone can be changed to one of the tones from Preinstalled, My Media or Download. Incoming tone and Message tone can have different ring tones assigned.
  • Page 34 Settings Setting Key Tone ... From Sound menu Key Tone required tone Sound Setting Key Volume ... From Sound menu Key Volume Setting Warning Tone ... From Sound menu Warning Tone On or Off < < < < adjust the volume level (0 - 4) <...
  • Page 35: Vibration Alert Setting

    Vibration Alert Setting Settings Vibration Alert can be set to indicate an incoming call and a received message. From Vibration Alert menu On or Off Vibration Alert <...
  • Page 36: Display Setting

    Display Setting Settings Setting Wallpaper ... From Display menu Wallpaper Preinstalled, My Media or Download required data Display 4 To view and save, press To save without viewing, press Setting Display Colour Theme ... From Display menu Colour Theme required colour Display colour, Contrast, Wallpaper and Backlight time...
  • Page 37: Language

    Language Settings Data connections Changing the Language ... It is possible to change the language that the phone uses for display messages and/or text entry. From Language menu Display language or Input language < required language Data connections ... GPRS settings and CSD settings are stored in the Data connections menu. Data can be sent/received using GPRS or CSD technology.
  • Page 38: Network Setting

    Network Setting Settings Changing to a New Network ... The New Search function is used to manually select a network that is available in your current location. From GSM network menu New Search network required network Select Network ... View available networks From GSM network menu Select Network National regulations...
  • Page 39 Settings When the Search Mode is set to Automatic the phone will automatically reselect a new network in order to maintain optimum network availability. The Network List is used when the Search Mode is set to Automatic. The location numbers in the Preferred Network List show the search priority. You can amend the List as follows: Option network...
  • Page 40: Call Settings

    Call Settings Settings Call Diverts ... Voice calls can be diverted to different numbers in different situations. For example, you may wish voice calls to be diverted to Voice mail in the event that the phone is switched off. To register a number to divert at first time: Calls From Calls menu Call Diverts...
  • Page 41 Settings When the number to divert is already registered: From Calls menu < Calls Request of Call divert will be send to network. When a divert situation is enabled the divert icon ( When updating or checking the status of Call Diverts the phone must be registered with a network. ( Call Divert settings Settings All calls...
  • Page 42 Settings Call Waiting ... If Call Waiting is switched on a second call can be received. From Calls menu Call Waiting 2 After “Call Waiting deactivated” or “Call Waiting activated” is shown, Calls 3 If you select NOTE: If you select Activate or Deactivate in the step 3, you can reset Call waiting.
  • Page 43 Settings Service Charge ... This function allows you to check the charges for your calls. From Calls menu Service Charge The following can be set. Calls Menu Item Cost Left Call Meter Price/Unit Max Cost NOTE: The duration of one unit may vary during day, peak and off-peak times. Call charges can be calculated accordingly.
  • Page 44: Security Settings

    Security Settings Settings The PIN protects your SIM against unauthorised use. If you enable the PIN, every time the phone is switched on you will be prompted to enter the PIN. The PIN2 controls security for the Fixed dial Store. PIN entry ...
  • Page 45 Settings Fixed Dial... Fixed Dial is a part of Contacts, but with added security. When Fixed Dial is enabled: Only numbers that are in the Fixed Dial Store may be dialled. Any manually dialled phone numbers must match a number already in the Fixed Dial Store. If you store, edit or delete a phone number, you have to enter your PIN2.
  • Page 46 Settings Call Barring ... Call Barring restricts certain outgoing and/or incoming calls using a password supplied by your service provider. When updating/checking the status of Call Barring the phone must be registered with a network. Varying call restrictions can be used for voice calls. From Security menu Security Call Barring...
  • Page 47: Time And Date

    Time and date Settings Setting Time and date ... From Time and date menu 2 # ~ , to enter the time using 24 hour clock Time and 4 # ~ , to enter the date date Time and date can NOTE: be shown on the top Some settings may be lost if the battery is removed or remains...
  • Page 48: Camera

    Camera Camera Taking a Picture ... The range from the camera is 30 cm - From Camera menu < To store the image in My Media: (After capturing the image) A or The picture will be saved in My Media / Pictures / Stored pictures. To return to camera operation without storing the image: (After capturing the image) NOTE: If you press See “Sending a Message”...
  • Page 49: Options In View Finder

    Options in View Finder... For options list Option Twilight mode Anti-flicker Image size Use and Save Pictures ... Once a picture has been taken it will be saved in My Media. To use a saved picture as your personal wallpaper or for Contacts, see “Setting Wallpaper” on page 33 and “Storing a Number in Your Phone” on page 75.
  • Page 50: Viewing Pictures

    Self-portrait ... The shutter button located on the side of the phone can be used to capture an image, for example, a self-portrait. You can activate the camera mode and take a picture by using the shutter button with your phone shut.
  • Page 51: Text Entry (Edit)

    Text Entry (Edit) You can use alphanumeric characters to enter details into Contacts, to create text, email messages, etc. ® (T9 , T9 or T9) (Input language: English) Alternatives . , - ? ! ’ @ : ; / 1 /(Hold) Character list A B C 2 (a b c 2)
  • Page 52: Shift Mode

    Shift mode Shift mode change ... The Shift mode changes by pressing (within 1 sec) ". Multi tap Tegic Abc -> ABC -> abc If Input mode is changed, Shift mode is initialised. Auto capital change ... Auto capital affects Abc and T9 If Input mode is changed to Abc or T9 , the first character is input as upper case and subsequent letters as lower case.
  • Page 53: Text Input

    Text Input ® Using this mode of text input dramatically reduces the number of key presses required: Press a key once for any letter you require on that key. The desired letter may not be displayed. Continue pressing other keys until the end of a word is reached; then check that the word has been typed correctly before continuing on to the next word.
  • Page 54: Messages Menu Structure

    Messages menu structure Create new Inbox Archive Messages Voicemail Chat (SIM dependent) Cell Broadcast Settings Memory status Call Mailbox Web mail (SIM dependent) Set Mailbox number On/Off Read messages Options...
  • Page 55: Messages

    Messages Messages MMS (Multimedia Messaging Service) Your phone is designed to be compatible with certain Multimedia Messaging Services (MMS). You can send pictures and music with text messages. The recipient can play it as a Slide show. MMS messages can be sent to another mobile phone with MMS capability or to an email address. When you receive an MMS message, a notice will inform you that you have received a message.
  • Page 56: Create New

    Messages Creating a New MMS ... From Create new menu When creating a message, these selections are available. Selection Create new Add picture Add text Add sound 2 After selecting a picture or sound or entering text, press Option Edit text Listen Send Remove picture/...
  • Page 57 Messages Creating a Slide ... In order to send an MMS with more than one picture, text or sound, you need to add new slides to the MMS. From Create new menu Create new Slide option Press Option Add new Send Slide duration Remove slide...
  • Page 58 Messages Sending a Message ... When a message is completed, press Send Add subject 3 Enter subject Add recipient Create new From Contacts, Enter number 6 appropriate entry Send Before sending a message, the following options are available. For options Option Add subject / Add recipient Edit...
  • Page 59 Messages Creating Options ... Before sending a message, you can set send options. When a message is completed, press Create new Option Request read Request delivery Validity Period Priority Delivery time < Send for the options < Create options Explanation Ask if the other party read the message Check if your message has been delivered to the other party Duration for which your message is stored at the message centre.
  • Page 60 Messages Receiving Messages ... When you receive an MMS message, the message notification indicator ( a tone, illumination, and/or vibration. From Inbox menu required message Inbox Press for the following options. Option Receive Reject Properties < < When is pressed Receive new message Delete message from the server and delete notification Show message details (such as message size and date)
  • Page 61 Messages Reading a Received Message ... From Inbox menu When viewing the list, the following options are available. Option Inbox Reply Reply to all Forward To contact Delete Properties < required message < When is pressed Create Reply Message Create Reply Message to the sender and all recipients of the message Forward MMS message Store numbers in Contacts Delete MMS message...
  • Page 62 Messages Viewing Message Lists ... The following messages are stored in Archive. Outbox: When a message has been sent it is stored in the Outbox. Unsent: Undelivered messages are stored in Unsent. Drafts: Use to create a message draft. MMS Drafts: Messages that are saved in the MMS mode are saved in Drafts. If the transmission Archive of an MMS message fails, the message is stored in Unsent together with other saved messages.
  • Page 63 Messages Setting the MMS Message Server / Profile ... MMS message server and profile setting must be done before you can send or receive an MMS message. Please check with your operator if additional settings are required. You can select one of five server URLs on the phone. From Settings menu (Message server) Settings required message server...
  • Page 64 Messages Setting Options ... The following settings are available. From Settings menu < Settings Option Reports Priority Validity Period Auto download Player mode Advanced Explanation Set Request read (ask if the other party read the message) / Send read (inform the other party that you have read the message when asked) /Request delivery (ask if the other party received the message) /Send delivery (inform the other party that you have received the message when asked)
  • Page 65: Sms (Short Message Service)

    Messages SMS (Short Message Service) It is possible to receive, display, edit and/or send text messages to mobile phones on any network that has a roaming agreement. (Dependent on the recipient’s phone parameters.) The message centre number should be preprogrammed on the Operator SIM, changing this number (See page 66) may cause failure of a text message.
  • Page 66 Sending a Message ... When you have created your message (see page 62), press < Send 2 Enter the destination phone number If you wish to select from Contacts < Send < From Contacts required contact < <...
  • Page 67 Messages Receiving Messages ... When you receive an SMS message ( illumination, and/or vibration. Reading a Received Message ... From Inbox menu Inbox When viewing messages, the following options are available. For options list Option Reply Forward Call Add to contacts Use detail Delete Delete all...
  • Page 68 Messages Viewing Message Lists ... These message lists are stored in Archive. Outbox: When a message has been sent, it is stored in the Outbox. Unsent: If the transmission of an SMS message fails, the message is stored in Unsent together with other saved messages.
  • Page 69 Messages Setting the Message Centre number ... The message centre number should be preprogrammed on the Operator SIM, changing this number may cause failure of a text message. From Settings menu Settings 3 Enter Message Centre number in international dial format (see “International Dialling”...
  • Page 70: Voicemail

    Messages Voicemail Voicemail is an innovative service that lets you stay up-to-date with all of your messages. You must subscribe to voicemail through your service provider before you can retrieve voicemail or email messages. Listening to Voicemail Messages ... Voicemail From Voicemail menu Call Mailbox Stored mailbox number is dialled and you can listen to voice messages.
  • Page 71: Chat

    Messages Chat Chat lets you enjoy the fun of instant messaging wherever you are. It’s the fun way to chat on-line. More information on this service may be obtained by contacting your service provider. Viewing Chat ... Chat From Chat menu Follow the screen contents It allows you to read sent and received...
  • Page 72: Cell Broadcast

    Messages Cell Broadcast You can receive messages on specified topics, such as traffic and weather information, from your network operator. Setting Cell Broadcast On/Off ... From Cell Broadcast menu Cell On/Off Broadcast On or Off Reading a Received Message ... From Cell Broadcast menu Read messages required message...
  • Page 73: Memory Status

    Messages Memory status You can see MMS/SMS memory status. Viewing MMS memory status ... From Messages menu Memory status The current percentage of MMS saved in Phone are displayed. Viewing SMS memory status... From Messages menu The current percentage of SMS saved in SIM and that in Phone are displayed. <...
  • Page 74: Contacts Menu Structure

    Contacts menu structure Contacts list Add contact Contacts Call log Speed Dial list View groups Advanced NOTE: When your phone is installed SIM compatible with SDN, Service numbers will be added in the Contacts menu. You can call a service number by selecting it from the list. Phone Dialled numbers Answered calls...
  • Page 75: Contacts

    Contacts Contacts Browsing Contacts You can search Contacts by name. When browsing by name, pressing a letter key will take you to the first entry starting with that letter. From Contacts list menu required contact Contacts list <...
  • Page 76: Options In Contacts

    Contacts Options in Contacts ... From Contacts list menu required contact required option Contacts Option list Call Send message Edit Add contact Copy to SIM/Phone Copy Contact to SIM or Phone Speed dial Delete Search Send by Infrared < < When is pressed Call Contact...
  • Page 77: Storing

    Contacts Storing Storing a Number in SIM ... In the SIM, you can store: Name, Phone number. The length of name and number and the total amount of data are dependent on your SIM. Phone numbers can From Add contact menu be stored in your SIM.
  • Page 78 Contacts Storing a Number in Your Phone ... In the phone, you can store: Name, Phone No. 1, Phone No. 2, email Address, Picture and Group. From Add contact menu Phone name icon ( Phone numbers can 3 Enter the name be stored in your phone.
  • Page 79: Call Log

    Contacts Call log Recently dialled phone numbers, answered calls and missed calls are stored in the Call log. It is possible to call, send message, add to Contacts, delete and delete all from stored numbers. Viewing Call log... From Call log menu Call log Dialling from Call log ...
  • Page 80: Call Log

    Contacts Saving a Phone Number from Call log into the Contacts list ... From Call log menu Dialled numbers, Answered calls or Missed calls required phone number Add to contacts Phone or SIM Call log required icon 7 Enter as appropriate (If required, repeat steps 6 and 7) Options in Call log ...
  • Page 81: Speed Dial

    Contacts Speed Dial Phone numbers from the Speed dial of Contacts can be dialled quickly. In Idle Mode, press and hold a number key (2 ~ 9). Setting Speed Dial... Speed From Speed Dial list menu Dial list When you select a phone number from Contacts, press 2 Enter phone number Viewing Stored Numbers In Idle Mode, press and hold a number key (2 ~ 9).
  • Page 82: Grouping Contacts Entries

    Contacts Grouping Contacts Entries The ability to group Contacts entries together is an extra function of Phone Contacts. Groups are used to collect together types of Contacts entries, e.g. business and personal. Each group can be suitably titled for quick access to the entries contained within. You can attach a particular sound to the groups to identify them.
  • Page 83: My Number

    Contacts My Number My Number is a contact where you can store your own numbers. Adding Numbers ... From Advanced menu Advanced 3 When My number is empty, press When My number is already stored in SIM profile, press 6 Enter the name 8 Enter the phone number If you select Mobile Profile, you can also select information such as additional number, email address and picture.
  • Page 84 Contacts Viewing Stored Numbers... From Advanced menu My Number Mobile Profile or SIM Profile Options in My Number Advanced When viewing My Number the following options are available. Mobile Profile (View Display) Option Edit Delete Send by Infrared < < SIM Profile (View Display and List Display) <...
  • Page 85: Group Settings

    Contacts Group Settings You can change the group name and attach a sound to a group. Changing Group Names ... From Advanced menu Advanced 3 Press and hold 4 Enter new group name Attaching a Sound to a Group ... From Advanced menu <...
  • Page 86: Memory Status

    Contacts Memory status ... Memory status shows how many locations are available in the contacts. From Advanced menu Memory status Advanced Copy from SIM ... It is possible to copy SIM Contacts to Phone Contacts. From Advanced menu Copy from SIM <...
  • Page 87: Browser

    Browser Browser Server Setting Before Internet services can be accessed, you need to subscribe to your network operator or Internet Service Provider (ISP) to enable the relevant configuration information. Please contact your network service provider to ensure that your network settings are correct. NOTE: Modifying previously entered settings can cause failure of the Browser.
  • Page 88: Viewing The Contents

    Browser Viewing the Contents From Browser menu < Select menu In each list, these options are available (see page 86). For options...
  • Page 89: Browser Options

    Browser Browser Options... From Browser menu Option Select Bookmarks Enter address Save image Set as bookmark Reload page Advanced Settings Exit browser (Options) < select from below options < When is pressed Select item Go to bookmark list Go to URL entry The image in contents is saved in “My Media”...
  • Page 90: Browser Options (Bookmarks)

    Browser Browser Options (Bookmarks)... From Browser menu or Content (Options) Bookmarks required bookmarks < to load the URL to select options Options: Go to page...Jump to the URL page Add bookmark ...Add to bookmarks Edit ...Edit bookmark Delete ... Delete bookmark Browser Options (Enter address) ...
  • Page 91: Browser Options (Save Image)

    Browser Browser Options (Save image) ... Displayed images can be saved in From Content < Browser Options (Set as bookmark) ... Favourite URLs can be saved in bookmarks. From Content 3 Enter title “ My Media ” (Options) < Save image to see whole image to save (Options)
  • Page 92: Browser Options (Reload Page)

    Browser Browser Options (Reload page)... Current Page can be reloaded. From Content (Options) Reload page < to reload this page.
  • Page 93: Browser Options (Advanced)

    Browser Browser Options (Advanced) From Browser menu or Content (Options) < Advanced Browser Options (Advanced - Home) ... Phone jumps to the set-up Homepage. From Advanced menu Home < to jump to home page Browser Options (Advanced - Clear cache) ... Cache is cleared.
  • Page 94 Browser Browser Options (Advanced) From Browser menu or Content (Options) Advanced < Browser Options (Advanced - Service Inbox) ... View WAP message and go to URL. From Advanced menu < Service Inbox < to load the URL to select option When text and URL are delivered from your service provider, the following options are available.
  • Page 95 Browser Browser Options (Advanced) From Browser menu or Content (Options) < Advanced Browser Options (Advanced - View address) ... View URL of the contents. From Advanced menu < View address Browser Options (Advanced - WAP information) ... View WAP information. From Advanced menu <...
  • Page 96: Browser Options (Settings)

    Browser Browser Options (Settings) From Browser menu or Content (Options) Settings < Browser Options (Settings - WAP profiles) ... WAP browser is set up. From Settings menu < WAP profiles required profile < to activate to select options Browser Options (Settings - Push access) ... Push access is set up.
  • Page 97: Games

    Games Games Selecting Games Five games are pre-installed: truck, SQUARE, SLOTZ, NINJA ACTION and MobileGolf. From Games menu required game you wish to play truck ... Games This game is an action puzzle game. The purpose of this game is to guide the truck from the starting point to the goal within a specified time limit.
  • Page 98: Ninja Action

    Games SLOTZ ... This game is a slot machine game. If the figures are aligned correctly, collect your bet. Key Operation < to enter the bet, or ', (, ) to stop the drum. < NINJA ACTION... This game is an action puzzle game. The purpose of this game is to turn over the randomly arranged tatami mats so that they are all face up (green) within a specified time limit.
  • Page 99: Settings

    Games Settings Game settings, such as volume and backlight etc, can be changed. From Settings menu required setting Settings Settings Sound volume Backlight Reset Information < Explanation Volume setting for game applications ON/OFF setting of Backlight in game applications Reset the game application settings Display of copyright information...
  • Page 100: Applications Menu Structure

    Applications menu structure (SIM Tool Kit) Applications Alarm Sound recorder Calculator Infrared NOTE: SIM Tool Kit is SIM dependent ( ). The menu name will be changed.
  • Page 101: Applications

    Applications Tool KIT Appli- cations Alarm When the set time is reached, the alarm will sound and the display will light with an alarm message. STK... This function is SIM dependent (E). This menu name will be changed. Alarm Setting the Alarm... From Alarm menu <...
  • Page 102: Adjusting The Alarm Time

    Applications Muting the Alarm... To end the alarm: 1 Press any key or < Disabling the alarm: From Alarm menu Alarm alarm icon ( Adjusting the Alarm Time... From Alarm menu clock icon ( 2 Enter the required time If you wish to change other settings, see “Setting the Alarm” on page 98. Snooze Function ...
  • Page 103: Sound Recorder

    Sound recorder Appli- cations Calculator Sound recorder... You can record sounds or your voice in My Media. The sounds you record can be attached to MMS. When My Media is full, sounds can not be recorded until a previous recording is first deleted. To record new sound: From Sound recorder <...
  • Page 104: Infrared

    Sending Data ... The types of data you can send are: Contacts, Pictures and Sounds in My Media. Ensure that the infrared ports of your X66 and the second phone or device are pointing at each other with no obstructions in between.
  • Page 105 Applications Setting Infrared ... You need to activate infrared before receiving data. From Infrared menu < to activate Infrared Sending Pictures and Sounds... From Idle display < If you try to send data that cannot be forwarded or saved, an error message will be displayed.
  • Page 106 Applications Sending Contacts... From Idle display < Contacts Contacts list select contact to send Infrared Send by Infrared Receiving Data via Infrared Port... You need to activate infrared before receiving data. Data received message is displayed then sent data is displayed. <...
  • Page 107: Calendar

    Calendar Calendar Viewing Calendar ... From Calendar menu will display recent and future calendars For options list Option Go to date Week starts on < When is pressed Jump to the required date With the calendar, it is possible to select which day the week starts on...
  • Page 108: My Media Menu Structure

    My Media menu structure Pictures Sounds My Media Shortcuts Text templates Memory status Stored pictures Download Take new picture Stored sounds Download Record new sound Create MMS Inbox (MMS) Create SMS Inbox (SMS) Profiles Alarm...
  • Page 109: My Media

    Pictures taken by the camera or images downloaded from the Internet can be managed. Viewing Picture / Image ... From Pictures menu The data saved in the X66 is located in My Media. There are four pre-defined folders Downloading Picture / Image File...
  • Page 110 My Media Picture Options ... When the picture is selected the following options are available. For options list Option Pictures Send MMS Send by Infrared As wallpaper Add to contacts Rename Delete Properties < When is pressed Attach pictures to MMS Messages (see “MMS Message”) Send pictures to another device by Infrared Use pictures as Wallpaper Add pictures to Contact...
  • Page 111: Sounds

    My Media Sounds (My Media > Sounds) Downloaded sounds and Recorded sounds are stored in Stored sounds. Checking Sounds... From Sounds menu Sounds Downloading Sounds ... From Sounds menu 2 The sound file download site is displayed Recording New Sound... From Sounds menu 2 The phone switches to Sound recorder mode (see page 100) Options in Sound File (Stored Sounds) ...
  • Page 112: Shortcuts

    My Media Shortcuts You can create shortcuts you wish to use in My Media. Viewing Shortcuts... From Shortcuts menu required content Shortcuts In shortcuts menu the following options are available. For options Option Edit Move Delete Access to Shortcuts: From Idle display required shortcut <...
  • Page 113: Text Templates

    My Media Text templates When creating a text message it is possible to use templates stored in the phone. You can save frequently used text as templates. Editing the Text templates ... From Text templates menu Text required template templates For options list Option Send message...
  • Page 114: Memory Status

    My Media Memory status You can see how much data is stored in the individual folders in My Media. The memory in “My Media” is separate from the MMS storage and Java NOTE: Memory status storage.
  • Page 115: Personal Wap / Mms Settings

    Personal WAP / MMS Settings Use the table below to record your GSM/GPRS WAP/MMS settings. Item Provisioning Information Setting No. 1 Profile name Homepage Gateway Port (Non secure / Secure) Data connections Profile name Account Password Call type Phone number Idle timer GPRS Profile name...
  • Page 116: Troubleshooting

    Troubleshooting Should any problem persist contact your dealer. Problem Cause Phone will not switch on. Extremely short battery life for a The network you are using and the condition new battery. of the battery can affect battery life. Short battery life for an old The battery has worn out.
  • Page 117 Problem Calls cannot be made from Fixed Dial Store. Calls cannot be received. Emergency calls cannot be made. You are not in a GSM coverage area. Phone numbers cannot be recalled from Contacts. Cause The phone is not switched on. Incoming calls are barred.
  • Page 118: Important Error Messages

    Important Error Messages These are some of the most important error messages which may be displayed: Roaming in the selected area is not allowed. Failed Roaming with the selected network is not allowed. The network has detected an authentication failure because your SIM is not registered with that network –...
  • Page 119 This message may not be stored Verification failure Incorrect Code Wrong entry Auto redial list full The message area is full. Your messages cannot be stored until some of the currently stored messages are deleted. On changing the phone lock code, verification of the new code is incorrect – retry changing the lock code with correct verification.
  • Page 120: Glossary Of Terms

    Glossary of Terms Access Point Name. Directs the user to the gateway or the required service. CHAP Challenge Handshake Authentication Protocol. A security feature in the GPRS network. Copy Copies selected text from a short text message without removing it from the original message. Circuit Switched Data.
  • Page 121 PIN2 Personal Identification Number used for the control of Fixed Dial Store and Call Charge metering. Supplied by your service provider. If the PIN2 is entered incorrectly 3 times, the PIN2 will be blocked. PUK/PUK2 PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2. Supplied by your service provider. If the PUK/ PUK2 is entered incorrectly 10 times, the PUK/PUK2 will be blocked.
  • Page 122: Specifications

    Specifications Bands Supported ... GSM900 Class 4 GSM1800 Class 1 Talk Time ...1.5 hrs. - 5 hrs. (90 min. - 300 min.) Standby Time... 75 hrs. - 230 hrs. NOTE: Talk and Standby time depend on network conditions, SIM usage and battery condition. Temperature Range Charging ...
  • Page 123: Licensing

    Licensing CP8 Patent © Panasonic Mobile Communications Co., Ltd. 2004 Information in this document is subject to change without notice. No part of these instructions may be reproduced or transmitted in any form or by any means without obtaining express permission from Panasonic Mobile Communications Co., Ltd.
  • Page 124: Notes

    Notes...
  • Page 125: Index

    Index A Activate Quiet Mode ... 18 Activating a Profile ... 27 Adding Numbers ... 80 Adjusting the Alarm Time ... 99 Alarm ... 98 Answering Calls ... 17 Applications ... 98 Applications menu structure ... 97 Archive (MMS) ... 59 Archive (SMS) ...
  • Page 126 D Data connections ... 34 Desktop Handsfree ... 19 Dialling from Call log... 76 Display... 9 Display Setting... 33 Displaying Menu ... 14 Downloading Picture / Image File ... 106 Downloading Sounds... 108 DTMF Tones... 20 E Earpiece Volume ... 19 Editing Profile ...
  • Page 127 Options in Phone Contacts... 75 Options in SIM Contacts ... 74 Options in Sound File (Stored Sounds) ... 108 Options in View Finder ... 46 Other Text Modes ... 50 P Pause Dial ... 20 Pause Key ... 8 Personal WAP / MMS Settings ... 112 Phone Basics and Managing Calls ...
  • Page 128 Specifications ... 119 Speed Dial ... 78 SQUARE ... 94 Standard Dialling ... 15 STK (SIM Tool Kit)... 98 Storing (Contacts)... 74 Storing a Number in SIM ... 74 Storing a Number in Your Phone... 75 Switching Phone ON/OFF ... 14 Symbols Used in the Manual ...
  • Page 129 The Serial Number can be found on the outside of the phone under the battery. For your convenience we recommend that you note the following details as a record of your purchase. Part Number Serial Number Dealer Name Purchase Date...

This manual is also suitable for:

Eb-x66

Table of Contents