Table of Contents
Advertisement
14. Scroll down to the "afc" value and double-click on it.
15. Go to the PhoneTool window on the right and click on the memory address "1052".
16. Change the DAC value to the one found in Step 8 above.
17. Click "OK".
18. Close PhoneTool and power down the phone.
9.6
Rxlev Calibration
Note: Before calibrating the mobile, ensure that:
1.
The latest version of Panasonic PhoneTool (Version 10.0) is being used.
2.
The mobile has been placed in Test Mode.
3.
The supply voltage is set to 3.8V with a current limit of 2.5A or higher.
Rxlev Gain Calibration
For RX Level calibration, the mobile must be connected to a GSM Test Set. The power into the mobile
should be –90.5 dBm.
PROVISIONAL ISSUE
− 9-18 −
Advertisement
Table of Contents
