To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1.
Press
or
2.
Press
setting, for example:
3.
Press
or
want, press
F e e d M o d e
You can use continuous or on-demand printing. On-demand printing allows
you to remove a label before printing the next one.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1.
Press
or
2.
Press
setting, for example:
until you see
SUPPLY
Separators
to set the batch separators option. You will see the current
SEPARATORS
Off
to see the other option. After you display the option you
. Press
until you see
SUPPLY
Feed Mode
to set the supply type option. You will see the current
SUPPLY TYPE
Continuous
twice to exit to the Main menu.
Setting Supply Options
3-3