S t o p B i t s
To change the setting, from the Main Menu, select Setup, Port Settings,
then User Comm. Then, follow these steps.
1.
Press
or
2.
Press
3.
Press
or
Press
three times to exit to the Main menu.
P a r i t y
To change the setting, from the Main Menu, select Setup, Port Settings,
then User Comm. Then, follow these steps.
1.
Press
or
2.
Press
3.
Press
or
three times to exit to the Main menu.
until you see
USER COMM
Stopbits
. You will see the current setting, for example:
STOPBITS
1
to display the number of stop bits you need, press
until you see
USER COMM
Parity
. You will see the current setting, for example:
PARITY
None
to display the parity you need, press
. Press
Communication Values
.
4-3