S p e e d
You can change the print speed for bar codes or graphics. If you select
"Default" for speed, formats with serial bar codes automatically print at 2.0
IPS.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1.
Press
or
2.
Press
example:
3.
Press
or
want, press
3-8
Setting Supply Options
until you see
SUPPLY
Speed
to set the speed option. You will see the current setting, for
SPEED
6.0 IPS
to see the other options. After you display the option you
. Press
twice to exit to the Main menu.