Supply Type - Paxar 9856 Operator's Handbook Manual

2.
Press
3. Press or
the value (moves the image toward the left side of the supply);
increases it (moves the image toward the right side of the supply).
4. Press
exit to the Main menu.
C u t P o s i t i o n
Changing these settings do not affect the printer's operation.
S u p p l y T y p e
You can print on black mark, die cut, or continuous supplies. You have to
tell the printer which supplies you are using.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1.
Press or
2.
Press
setting, for example:
3. Press or
want, press
. You will see the current setting, for example:
Enter margin pos
[-99/99]: +0
to change the margin position. Pressing
when the number you need appears. Press
until you see
SUPPLY

Supply Type

to set the supply type option. You will see the current
SUPPLY TYPE
Black Mark
to see the other options. After you display the option you
. Press twice to exit to the Main menu.
decreases
twice to
Setting Supply Options 3-7