Table of Contents
Advertisement
3.
Press
or
value (moves the image down);
4.
Press
to the Main menu.
S u p p l y P o s i t i o n
This function adjusts how much supply feeds out of the exit chute. You may
need to adjust the supply in or out to allow
labels to be removed.
die cut labels to be removed easily.
The adjustments are in dots (0.0033 inch).
Increase the number to feed more supply out of the chute.
Decrease the number to feed less supply out of the chute.
This option takes effect on the next label printed. Changing supply position
may also affect print position.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1.
Press
or
2.
Press
3.
Press
or
the value (feeds less supply);
to change the print position. Pressing
when the number you need appears. Press
until you see
SUPPLY
Supply Pos
. You will see the current setting, for example:
Enter supply pos
[-300/300]: +0
to change the supply position. Pressing
increases it (moves the image up).
increases it (feeds more supply).
decreases the
twice to exit
decreases
Setting Supply Options
3-5
Advertisement
Table of Contents
