S e t t i n g t h e F e e d M o d e
There are two feed modes: peel and no peel (continuous). Peel mode
separates the backing paper from the label. No peel (continuous) mode
prints labels in a continuous strip.
1. From the Printer Setup menu, press or
FEED MODE
2. Press Enter. You see
SUPPLY FEED MODE
NO PEEL
3. Press or
current setting is displayed on the right. The default is No Peel.
4. Press or
RETURN TO PRINTER MENU
5. Press Enter.
NPL
to select the mode you need, then press Enter. The
until you see
until you see
Setting up the printer 2-3