Clear Spanning-Tree Counters - Cisco Catalyst 2950 Command Reference Manual

clear spanning-tree counters

clear spanning-tree counters
Use the clear spanning-tree counters privileged EXEC command to clear the spanning-tree counters.
Syntax Description
interface interface-id
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.1(13)EA1
Examples
This example shows how to clear spanning-tree counters for all interfaces:
Switch# clear spanning-tree counters
Related Commands Command
show spanning-tree
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-52
clear spanning-tree counters [interface interface-id]
(Optional) Clear all spanning-tree counters on the specified interface. If
interface-id is not specified, spanning-tree counters are cleared for all
interfaces.
Modification
This command was introduced.
Description
Displays spanning-tree state information.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01