Cisco Catalyst 2950 Command Reference Manual page 571

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Name: fddi-default
<output truncated>
This is an example of output from the show changes command:
Switch(vlan)# show changes
DELETED:
Name: VLAN0004
DELETED:
Name: VLAN0006
MODIFIED:
Current State: Operational
This example shows how to display the differences between VLAN 7 in the current database and the
proposed database:
Switch(vlan)# show changes 7
MODIFIED:
Current State: Operational
This is an example of output from the show current 20 command. It displays only VLAN 20 of the
current database:
Switch(vlan)# show current 20
Name: VLAN0020
Related Commands Command
show vlan
shutdown vlan
vlan (global
configuration)
OL-10102-01
Media Type: FDDI
VLAN 802.10 Id: 101002
State: Operational
MTU: 1500
Bridge Type: SRB
Ring Number: 0
Translational Bridged VLAN: 1
Translational Bridged VLAN: 1003
Media Type: Ethernet
VLAN 802.10 Id: 100004
State: Operational
MTU: 1500
Media Type: Ethernet
VLAN 802.10 Id: 100006
State: Operational
MTU: 1500
Modified State: Suspended
Modified State: Suspended
Media Type: Ethernet
VLAN 802.10 Id: 100020
State: Operational
MTU: 1500
Description
Displays the parameters for all configured VLANs in the administrative domain.
Shuts down (suspends) local traffic on the specified VLAN.
Enters config-vlan mode for configuring normal-range and extended-range
VLANs.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
vlan database
2-545