Cisco Catalyst 2950 Command Reference Manual page 461

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Switch(config)# snmp-server enable traps envmon fan
This example shows how to send VTP traps to the NMS:
Switch(config)# snmp-server enable traps vtp
You can verify your setting by entering the show vtp status privileged EXEC or the show
running-config privileged EXEC command.
Related Commands Command
show running-config
snmp-server host
0L-10102-01
Description
Displays the running configuration on the switch. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference for
Release 12.1 > Cisco IOS File Management Commands > Configuration
File Commands.
Specifies the host that receives SNMP traps.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
snmp-server enable traps
2-433