Cisco Catalyst 2950 Command Reference Manual page 334

show controllers lre link monitor
This is an example that shows how to display all LRE link monitor parameters for the attached CPE
device:
Switch# show controllers lre link monitor parameters remote
LongReachEthernet0/1: LRE Link Health Monitor Parameters :
Time
-------- ------- --- --- ---
00:32:30
00:30:30
00:15:30
00:00:30
23:45:30
23:30:30
23:15:30
<output truncated>
This is an example that shows how to display all LRE link monitor statistics for the LRE controller:
Switch# show controllers lre link monitor statistics local
LongReachEthernet0/1: LRE Link Health Monitor Stats :
Time
-------- ------- --------------- ---------- ----------
06:58:30
06:45:30
06:30:30
06:15:30
06:00:30
05:45:30
05:30:30
05:15:30
Related Commands Command
clear controllers lre link monitor
link monitor
link monitor logging
link monitor threshold rserr
link monitor threshold snr
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-306
SNR
Samples Min Max Err Min
------- -------
2 0 0 0 - 85.6
15 0 0 0 - 85.6
15 0 0 0 - 85.6
15 0 0 0 - 85.6
15 0 0 0 - 85.6
15 0 0 0 - 85.6
15 0 0 0 - 85.6
RS Errors
Samples Count Alarm
13 0 0
15 0 0
15 0 0
15 0 0
15 0 0
15 0 0
15 0 0
15 0 0
Chapter 2
Tx Power SwAGCGain
Max Min
------- -------
- 85.6 - 2.0 -
- 85.6 - 2.0 -
- 85.6 - 2.0 -
- 85.6 - 2.0 -
- 85.6 - 2.0 -
- 85.6 - 2.0 -
- 85.6 - 2.0 -
Link Fail Freeze
Count Count
2 3
2 3
2 3
2 3
2 3
2 3
2 3
2 3
Description
Deletes LRE link monitor data.
Enables the LRE link monitor on a port.
Enables link monitor event logging per port.
Sets a Reed-Solomon error threshold for the LRE link monitor.
Sets an signal-to-noise margin for the LRE link monitor.
Catalyst 2950 and 2955 Cisco IOS Commands
Max
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0L-10102-01