Cisco Catalyst 2950 Command Reference Manual page 662

debug sw-vlan
Related Commands Command
show debugging
show vlan
show vtp
Catalyst 2950 and Catalyst 2955 Switch Command Reference
C-22
Appendix C
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Displays the parameters for all configured VLANs or one VLAN (if the
VLAN name or ID is specified) in the administrative domain.
Displays general information about VTP management domain, status, and
counters.
Catalyst 2950 and 2955 Switch Debug Commands
OL-10102-01