Show Mvr - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
This is an example of output from the show mvr interface gigabitethernet0/1 command:
Switch# show mvr interface gigabitethernet0/1
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
This is an example of output from the show mvr interface fastethernet0/1 member command:
Switch# show mvr interface fastethernet0/1 member
239.255.0.0
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
Related Commands Command
mvr
mvr type

show mvr

show mvr members
0L-10102-01
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
Description
Enables and configures multicast VLAN registration on the switch.
Configures an MVR port as a receiver or a source port.
Displays the global MVR configuration on the switch.
Displays all receiver ports that are members of an MVR multicast group.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show mvr interface
2-385