Cisco Catalyst 2950 Command Reference Manual page 295

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Examples This example shows how to assign a DSCP value of 10 to all FTP traffic without any policers:
Switch(config)# policy-map policy_ftp
Switch(config-pmap)# class ftp_class
Switch(config-pmap-c)# set ip dscp 10
Switch(config-pmap)# exit
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command
police
policy-map
show policy-map
0L-10102-01
Description
Defines a policer for classified traffic.
Creates or modifies a policy map that can be attached to multiple interfaces to
specify a service policy.
Displays quality of service (QoS) policy maps.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
set
2-267