Configuration Edit/Display - Paradyne Hotwire 7974 Installation Instructions Manual

If you select . . .
Current
Configuration
Default Factory
Configuration
Configuration
Loader

Configuration Edit/Display

The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded. To access the Configuration Edit/Display screen, follow
this menu selection sequence:
Main Menu
– or –
Main Menu
main/config/edit
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Then . . .
The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
The Configuration Loader screen is displayed allowing you to
upload or download configurations from a TFTP server.
Configuration Current Configuration
Configuration Default Factory Configuration
CONFIGURATION EDIT/DISPLAY
Network
DSX-1 | SYNC Port | G.703
System Options
Communication Port
Management and Communication
9
Hotwire
Model: 79xx
MainMenu Exit
Î