Call Setup Branch; Overview - Paradyne COMSPHERE 3911 Installation And Operation Manual

Overview

The Call Setup function is not available in TMp Control mode.
For dial backup applications, the Call Setup branch of the Top-Level menu allows you to dial,
disconnect, and answer telephone calls. For leased backup applications, the Call Setup branch
allows you to switch between the primary leased line and the backup leased line.
In leased backup operation, a 2-wire leased line is used as the backup facility instead of the
normal 2-wire dial line. Plug the leased line into the jack labeled DIAL on the rear panel of the
modem and enable the Dual_Leased_Ln configuration option. (Refer to Leased Line in
Chapter 5, DCP Configuration, for configuration options.) Except for dialing, ring indication,
and call progression functions, you control the backup function as if it were a normal dial
backup.
Status Configure
Dial
3910-A2-GN32-40

Call Setup Branch

PList Control Test
(Dial
Backup
Answer Dial_Standby
Disconnect
Return_to_Dial
Directory Locations 1 - 24
"Status"
SubHS
Call_Setup
only)
Change_Directory
or
September 1998
10
Tlk/Data Security
Directory_Status
(Does not appear
in North America)
Remote
10-1